Software
Logistics And Transport Monitor
All have become accustomed to the use of software systems to automate accounting, optimization of the warehouse, accounting for vehicles, etc. However, progress is not in place, and modern information technology open new opportunities for fleet management and organization of transport logistics company, from creating the optimal plan for delivery of goods using electronic cards to monitor vehicles. Thus the cost of such solutions is that their implementation can not afford to not only large enterprises but also small businesses, and return on investment in logistics systems and monitoring only a few months. The monitoring system of transportation is a hardware-software complex, which includes several components: electronic maps, flight controllers for automobiles, sensors and actuators (used to monitor the status of the vehicle or equipment installed on it (the sensor switch, emergency button, etc.) The system works by monitoring the transport: The park the vehicle on-board controller (on the car can also be installed additional sensors: the sensor plug, the opening / closing doors, emergency button, etc.), which defines location, speed, direction of movement of the car with the help of global positioning satellite system GPS, as well as analyzes the state of the sensors. Onboard controller transmits the data at specified intervals via GSM (for GPRS-channel) to the control center that allows the operator to monitor objects in real time. Dispatch Center is a computer (PC, laptop) with installed software and connected to Internet over a dedicated channel. Manager sees the location of vehicles on an electronic map, and analyze information, if necessary, quickly react to the situation. The effect of the introduction of systems obvious: Reduce delivery time of products, increase the efficiency of the use of vehicles by reducing the unsustainable path, and downtime, reducing costs by delivering a 10-20% fuel savings; The increase in labor productivity increase discipline drivers; Prevention of misuse of vehicles, reducing the risk of losses from theft and transportation of goods.
Software for Accounting Companies
In accordance with the provisions of Clause 13 (Standard) 11 accounting companies can create software to compensate for the subsequent (future) operating costs, including the payment of leave to employees. The amounts established reserve are spending (accounting). A provision is to ensure the inclusion of a uniform cost of vacation pay the production costs of the reporting period. The ability to create an organization of this reserve, as well as the method of its formation, determined by the accounting policy applied for accounting purposes. The amount of payments in reserve is determined by the sum of the cost of paying leave to employees and social insurance and welfare, including the amount of the unified social tax, insurance premiums for compulsory pension insurance and insurance premiums for compulsory insurance from industrial accidents and occupational diseases. In accordance with the rules of the legislation on accounting and taxation created by the organization of a reserve for future expenses to pay holidays are subject to mandatory inventory in order to identify the validity of the amounts assessed. Instruction number 69 provides an inventory reserve for vacation pay, including payments for State social insurance in these amounts at the end of the year. The balance of the allowance for holiday pay is determined by calculation, based on the number of days of unused vacation and average daily wage workers. Providing leave to accrue on a fixed percentage and include period costs to a certain amount regardless of the actual amount of accrued vacation time, and at the end of the year on the need to ensure that an inventory and excess or cancel the remaining amount assessed additional software. Inventory Reserve holidays – time-consuming process, and if a large number of operating personnel in the enterprise – requires considerable effort and labor. Smart automation of the process eliminates the errors of calculation, typical of the so-called human factor, and greatly speed up the process. In the system of ‘Business Staff’, designed to account for personnel and payroll, are designed monthly calculation mode in the provision of holidays and how to conduct annual inventory of vacation. Based on the information stored in the database, an inventory reserve holidays automatically. Methods of calculating the amount of vacation allowance, used in the ‘Business Staff ‘1. Formation of the directory of tax and the formula for calculating the amount of reserve holidays. Given that the provision applies to holiday spending (accounting), it is necessary to generate a directory of tax Company tax and the appropriate formula for its calculation. 1.1. The tab ‘Types of tax’ view form algorithm payroll (accounting department -> The algorithm for calculating the salary) to add a new type of tax. 1.2. To form Tax type edit in the ‘Category of’ set ‘Reserve holidays. ” 1.3. On the form for editing Type of tax in the ‘ID’ to form a formula calculating the amount of vacation allowance, using the system variables: the amount of the provision leaves the enterprise – returns the calculated amount of reserves leave the company on the basis of the calculated rates introduced in the provision of holiday units. The tax rate on income tax – returns the current tax rate for the calculation. Used to calculate payroll taxes. The sum of the register in the shop business accounting for all payments – the amount on the register for all accounting accruals for the month of shop staff
Printing Design
A designer in the printing complains and says that the layout in order to bring longer and more expensive than the mark up again. However, such problems do not only rarely print publishers. In fact, even professionals, thoroughly know the whole publishing process, like drawing on the mat for a mouse, are not immune from a shortage of fonts. There should be small, so to speak, digression. The consequence of such problems is creation of two sets of fonts: Type1 – for printing and TrueType (for office systems).
From the perspective of a simple user is no difference between them we find: select the text you selected in the list of font name sent a document to the printer and ready. But here's the processes occurring between the printer and word processor, in each case differ dramatically, so often in print printing text in TrueType, will not work at all. And even cross-platform PDF-file will not help here: TrueType fonts just porushat the entire document. It would seem that there is no problem, such as sufficient to establish the Type1, and you can safely do layout. But the problem is that these products have been developed for publishers and printers, so their sets are very expensive. and what do those small businesses or simply to private entrepreneurs, who can not afford to pay big money for a layout, and print leaflet passion as necessary? What do newcomers tipografnom fact, who studied the function 'Create Booklet' in Microsoft Word, but have no ability or desire to delve into the intricacies of pre-press? Fairly good option is to use a universal virtual printer. It allows you to finally combine the two into one reality. All very easy – you just 'print' to impose a booklet on the virtual printer and the result is file that appears exactly your registration. Even the PDF-file, thus obtained, 'understands' fonts TrueType – a document is placed in a raster image, and parameters can be chosen so that the print quality does not different from that obtained in the traditional way. No matter what hidden features you missed the pre-press – your brochure will always look the way you want.
Pages
Archives
- November 2024
- October 2024
- September 2024
- August 2024
- July 2024
- June 2024
- May 2024
- November 2023
- June 2023
- April 2023
- December 2020
- November 2020
- September 2020
- August 2020
- July 2020
- June 2020
- May 2020
- April 2020
- March 2020
- February 2020
- January 2020
- December 2019
- November 2019
- October 2019
- September 2019
- August 2019
- July 2019
- June 2019
- May 2019
- April 2019
- March 2019
- February 2019
- January 2019
- December 2018
- November 2018
- October 2018
- September 2018
- August 2018
- July 2018
- May 2018
- April 2018
- March 2018
- February 2018
- January 2018
- December 2017
- November 2017
- October 2017
- September 2017
- August 2017
- July 2017
- June 2017
- May 2017
- April 2017
- February 2017
- January 2017
- December 2016
- November 2016
- October 2016
- September 2016
- August 2016
- July 2016
- June 2016
- May 2016
- April 2016
- March 2016
- January 2016
- November 2015
- August 2015
- July 2015
- November 2014
- June 2014
- May 2014
- April 2014
- March 2014
- February 2014
- January 2014
- December 2013
- November 2013
- October 2013
- September 2013
- August 2013
- July 2013
- June 2013
- May 2013
- April 2013
- March 2013
- February 2013
- January 2013
- December 2012
- November 2012
- October 2012
- September 2012
- August 2012
- July 2012
- June 2012
- April 2012
- March 2012
- February 2012
- January 2012
- December 2011
- November 2011
- October 2011
- September 2011
- July 2011
- June 2011
- May 2011
- April 2011
- August 2010