moisture-content
Moisture Content Sieve
1. The moisture of the material If the moisture content of the materials is too high, in the vibrating process, it is easy to form support in the vibrating screen. In addition, the physical block presses against each other, which will make the adhesive block more dense, increasing the resistance of the material movement and make it difficult for the material particles to be layered and sorted. The adhesion of the materials will also make the sieve smaller and plug the sieve, reducing the effective screening area, sometimes it is even unable to carry out the screening. Therefore, when the material moisture content is too high, some remedies should be taken for the screening process such as drying material.2.The particle size of the materialsThe d of the sieve of the pipes in the screening process is affected by many factors and the most direct and important factor is the particle size and the sieve size.
The ratio between the material particle size and the mesh size is called the relative coexistence. The smaller the relative coexistence is, the higher the d of the sieve will be. When the relative particle size is close to 1, the d of the sieve approaches zero. Usually, we call the materials whose relative particle size is between 0.7-1.0 as of the difficult screening materials or critical materials. The components of the difficult screening material also affect the d of the sieve. The greater the content of the material in difficult materials is, the smaller the d of the sieve will be. And the screening efficiency of the vibrating screen will be lower.
In order to be able to get a higher screening efficiency, we should try to reduce the content of difficult screening aggregates. In addition, the differences of the particle size also have a certain impact on the screening efficiency index. If the difference is too large, which will result in the laarge production cycle, restricting the product quality and processing capacity. Therefore, the aggregate gradation should be strictly controlled. jaw crusher:
Pages
Archives
- September 2024
- August 2024
- July 2024
- June 2024
- May 2024
- November 2023
- June 2023
- April 2023
- December 2020
- November 2020
- September 2020
- August 2020
- July 2020
- June 2020
- May 2020
- April 2020
- March 2020
- February 2020
- January 2020
- December 2019
- November 2019
- October 2019
- September 2019
- August 2019
- July 2019
- June 2019
- May 2019
- April 2019
- March 2019
- February 2019
- January 2019
- December 2018
- November 2018
- October 2018
- September 2018
- August 2018
- July 2018
- May 2018
- April 2018
- March 2018
- February 2018
- January 2018
- December 2017
- November 2017
- October 2017
- September 2017
- August 2017
- July 2017
- June 2017
- May 2017
- April 2017
- February 2017
- January 2017
- December 2016
- November 2016
- October 2016
- September 2016
- August 2016
- July 2016
- June 2016
- May 2016
- April 2016
- March 2016
- January 2016
- November 2015
- August 2015
- July 2015
- November 2014
- June 2014
- May 2014
- April 2014
- March 2014
- February 2014
- January 2014
- December 2013
- November 2013
- October 2013
- September 2013
- August 2013
- July 2013
- June 2013
- May 2013
- April 2013
- March 2013
- February 2013
- January 2013
- December 2012
- November 2012
- October 2012
- September 2012
- August 2012
- July 2012
- June 2012
- April 2012
- March 2012
- February 2012
- January 2012
- December 2011
- November 2011
- October 2011
- September 2011
- July 2011
- June 2011
- May 2011
- April 2011
- August 2010