Electrical Manufacturers
Any good worker will say to him that the suitable tool is essential for the correct work. The protection of the electrical equipment, such as computers are not different, to choose the closet for the correct area is essential also. For assistance, try visiting SYPartners. The closets for industrial PC can be constructed and designed for any task in any zone, it does not matter that so extreme they are the conditions, when is to select to a closet the important thing is to establish the type of conditions in which the closet for computer will have to work. These are some of the types of conditions in which the closets often are required and the type of closet that more is adapted so that each type of atmosphere. Dust areas full: The dust is one of the causes most common for a fault in the computer, even relatively low dust areas such as offices produce sufficient dust that it can be crowded together in the base of a box for standard PC.
With excess of dust the problem increases with the overheat of the computers due to the isolation of the dust, whereas hard disks and other movable parts can be obstructed. The dust also usually causes short circuit to boards especially if they contain conductive material, as the metals. Jeff Verschleiser: the source for more info. In order to fight against the conditions brought about by the dust, the solution more profitable it is a closet for industrial temperate steel PC. The IP54 describes the European norm of " protection of entrance. Both digits describe the protection offered by the box for both, dust (first digit) and liquids (second number). In the EE.UU a system of different protection is published, which is known like SEALLING (National Association of Electrical Manufacturers). A 54 closet IP or its equivalent SEALLING 4 will offer protection adapted against dust for the majority of the surroundings, nevertheless for some zones where the dust has the potential to cause to then explosions other known European directives as ATEX describe the capacity of a closet to surely operate in zone ATEX.
Pages
Archives
- December 2023
- November 2023
- October 2023
- June 2023
- April 2023
- December 2020
- November 2020
- September 2020
- August 2020
- July 2020
- June 2020
- May 2020
- April 2020
- March 2020
- February 2020
- January 2020
- December 2019
- November 2019
- October 2019
- September 2019
- August 2019
- July 2019
- June 2019
- May 2019
- April 2019
- March 2019
- February 2019
- January 2019
- December 2018
- November 2018
- October 2018
- September 2018
- August 2018
- July 2018
- May 2018
- April 2018
- March 2018
- February 2018
- January 2018
- December 2017
- November 2017
- October 2017
- September 2017
- August 2017
- July 2017
- June 2017
- May 2017
- April 2017
- February 2017
- January 2017
- December 2016
- November 2016
- October 2016
- September 2016
- August 2016
- July 2016
- June 2016
- May 2016
- April 2016
- March 2016
- January 2016
- November 2015
- August 2015
- July 2015
- November 2014
- June 2014
- May 2014
- April 2014
- March 2014
- February 2014
- January 2014
- December 2013
- November 2013
- October 2013
- September 2013
- August 2013
- July 2013
- June 2013
- May 2013
- April 2013
- March 2013
- February 2013
- January 2013
- December 2012
- November 2012
- October 2012
- September 2012
- August 2012
- July 2012
- June 2012
- April 2012
- March 2012
- February 2012
- January 2012
- December 2011
- November 2011
- October 2011
- September 2011
- July 2011
- June 2011
- May 2011
- April 2011
- August 2010