Magnet Investments

Label Printer Broke Again

There are many nuances when labels start poorly printed. But this is usually not serious reasons for which the owners label printers can judge that he had nespraven. The reason for misbehavior equipment can become slick and gaps in the bar code because of the printing process. In addition, owners of printers often try to print a very small bar code, and, in higher resolution than is generally permissible. You do not have to deal with such unpleasant situations – in fact the work process does not require deposits – test possible, "read" the printed barcode scanner so that you can not later used in practice. You decide to buy a thermal printer for your business? Us see what difficulties you may encounter, and that the first thing you should pay close attention.

Firstly, this authorization. Because a large number of thermal printers have a resolution of 203 dpi (dots per inch (dpi)), ie, 8 points / mm. But in practice, all the bar codes printed labels just fine at this resolution, but text and graphics can be slightly curved. As for printers with 300 dpi, then they are much more expensive, but these amounts are quite justified. But you can always be assured of excellent quality text and graphics! An important factor when choosing and the printer is printing width. Usually termopechatnye heads are sold in standard sizes – a 2, 4, 6 and 8 inches. Before purchasing always determine what size labels you the most acceptable.

Classical width Labels – 25 mm. To print these labels, you can use 10-inch printer, and have margins for printing labels, and other sizes – just in case you suddenly want to expand the range of your products. and recently. Do not forget to update the cash registers at your company: for the period of time, as they serve you, they are already fairly overspend. Good luck to you business and prosperity!

Tags: business